6.87″ Coil for Scottruss 6050 & Scotpanel 7090
70 ksi, G115, dry, full prime domestic steel with mill certifications. Slit, spun to your coil weight and ready to ship in 3 days.
Built for Two Scottsdale Machines
This product was created specifically for the Scottruss 6050 truss machine and the Scotpanel 7090 wall panel machine. It is already slit to 6.87″, spun down to the coil weights our customers' decoilers take, and sitting on our floor ready to ship.
It carries a higher yield strength and a heavier zinc coating than typical structural coil, and it ships dry.
6.87″ Coil Specs
Offered only in 33 mil: 0.0346″ base steel.
| Slit width | 6.87″ |
|---|---|
| Base steel thickness | 0.0346″ (33 mil), per mill certification, before G115 coating |
| Yield strength | 70 ksi minimum (ASTM A653 HSLAS Grade 70) |
| Coating | G115 (1.15 oz/ft² total, both sides) |
| Surface | Dry |
| Quality | Full prime, domestic, with mill certifications |
| Governing spec | ASTM A1003; coating per ASTM A653; tolerances per ASTM A924 |
| Coil ID | 20″ |
| Certification | Mill test report with heat number, yield, tensile, elongation and coating weight |
Compared With Typical US Structural Coil
Swipe the table sideways to see every column →
| Item | Typical US structural coil | Our 6.87″ coil |
|---|---|---|
| Base steel thickness | 33 mil: 0.0346″ design | 0.0346″ per mill cert |
| Yield strength | 50 ksi (SS Grade 50) | 70 ksi (HSLAS Grade 70) |
| Coating | G60 interior; G90 exterior and coastal | G115, 28% more zinc than G90 |
| Surface | Not oiled recommended | Dry |
| Quality | Mill certification with heat number | Full prime, domestic, mill certified |
Running Today on the Scottruss 6050 & Scotpanel 7090
The 6.87″ width runs on Scottruss 6050 and Scotpanel 7090 machines set up for a 6.80″ coil width.
- ✓Running in production today on Scottruss 6050 and Scotpanel 7090 machines with no issues.
- ✓Slit and on the floor now, not waiting on a mill run.
What the Mill Cert Shows
Values from a recent heat of this product, including full heat chemistry on the sample cert. Every coil ships with its own mill test report, traceable to the heat number.
| Specification | ASTM A653 HSLAS Grade 70, 70 ksi minimum yield |
|---|---|
| Vendor | Steel Dynamics |
| Base steel thickness | 0.0346″ (33 mil) |
| Yield strength | 78,500 psi |
| Tensile strength | 91,100 psi |
| Elongation | 21% |
| Coating | G115, minimized spangle, chemically treated (dry) |
| Origin | Melted and manufactured in the USA |
Spun to Your Decoiler
Coils are stocked already slit at 7,000 lb. Each coil is spun down individually to your maximum coil weight, all on a 20″ ID.
Swipe the table sideways to see every column →
| Coil weight | Approx. OD | Approx. footage |
|---|---|---|
| 1,700 lb | 39″ | 2,000 ft |
| 2,300 lb | 44″ | 2,700 ft |
| 3,500 lb | 52″ | 4,100 ft |
| 7,000 lb | 71″ | 8,200 ft |
Coil for the Whole Scottsdale Lineup
The 6.87″ coil is a special offering for the Scottruss 6050 and Scotpanel 7090. We also slit any other width and gauge in the Scottsdale machine lineup, 20 gauge through 10 gauge, meeting each machine's requirements. See coil for all LGS roll formers.
Terms
- All material is quoted FOB Bessemer, AL 35022.
- Pricing is subject to market price at the time of order.
- All orders are subject to availability, credit approval and order acceptance.
- All material is mill certified.
- Every order is confirmed on a signed order acceptance. You check width, gauge, coating, coil weight and OD before we ship, which protects both of us from costly mistakes.
Market conditions can affect mill supply and stock levels. Availability is confirmed at the time of order.
Common Questions
Will 6.87″ coil run on a Scottruss 6050 or Scotpanel 7090?
Yes. Our 6.87″ coil runs on Scottruss 6050 and Scotpanel 7090 machines set up for a 6.80″ coil width. It runs in production today with no issues.
What is the thickness?
33 mil: 0.0346″ base steel thickness per mill certification, measured before the G115 coating. It is offered only in this thickness.
Is the coil oiled?
No. This coil ships dry.
What coil weights are available?
Coils are stocked slit at 7,000 lb and spun down individually to your decoiler's maximum: 1,700, 2,300, 3,500 or 7,000 lb, all on a 20″ ID.
How fast does it ship?
It is slit and on the floor, ready to ship in 3 days, subject to availability, credit approval and order acceptance. Quoted FOB Bessemer, AL 35022.
Do you supply other widths and gauges for Scottsdale machines?
Yes. We slit any width and gauge in the Scottsdale machine lineup, 20 gauge through 10 gauge, generally in 5 working days.
Scottsdale, Scottruss and Scotpanel are trademarks of Scottsdale Construction Systems. Falcon Metals & Supply Company is not affiliated with Scottsdale Construction Systems. Machine names are used only to identify the equipment our coil is slit for.
Related Categories
Running a Scottruss 6050 or Scotpanel 7090?
Tell us your decoiler's maximum coil weight and ship-to location and we'll get back to you fast.