Cold Rolled Channel in Birmingham, AL
Three standard sizes, 3/4″, 1-1/2″ and 2-1/2″, roll formed in-house at our Bessemer plant.
Three Standard Sizes
Cold rolled channel is a plain U-shaped channel: a web, two 1/2″ flanges and no stiffening lip. It is run through the punch-outs of structural studs as bridging to hold the studs in line, and it is used as carrying channel in suspended ceilings and as light bracing and framing.
Cold Rolled Channel Profile
- Web depth
- 3/4″, 1-1/2″ and 2-1/2″
- Flange
- 1/2″, top and bottom, no lip
- Thickness
- 16 gauge in 3/4″; 18 and 16 gauge in 1-1/2″ and 2-1/2″
- Coating
- G60 or G90 hot-dip galvanized
To quote cold rolled channel, send the web depth, gauge, coating, lengths and quantities.
| Member | Gross section properties | Minor axis | Torsional properties | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Webin | Gauge | Flangein | Tin | Weightlb/ft | Areain² | Ixin⁴ | Sxin³ | Rxin | Iyin⁴ | Syin³ | Ryin | Xoin | J ×1000in⁴ | Cwin⁶ | Roin | Beta |
| 3/4″ | 16 | 0.500 | 0.0566 | 0.297 | 0.087 | 0.007 | 0.019 | 0.289 | 0.002 | 0.006 | 0.156 | -0.354 | 0.093 | 0.000 | 0.483 | 0.462 |
| 1-1/2″ | 18 | 0.500 | 0.0451 | 0.358 | 0.105 | 0.032 | 0.043 | 0.555 | 0.002 | 0.006 | 0.147 | -0.266 | 0.071 | 0.001 | 0.633 | 0.823 |
| 16 | 0.500 | 0.0566 | 0.441 | 0.130 | 0.039 | 0.052 | 0.548 | 0.003 | 0.007 | 0.145 | -0.266 | 0.138 | 0.001 | 0.627 | 0.820 | |
| 2-1/2″ | 18 | 0.500 | 0.0451 | 0.511 | 0.150 | 0.115 | 0.092 | 0.875 | 0.003 | 0.006 | 0.131 | -0.203 | 0.102 | 0.003 | 0.908 | 0.950 |
| 16 | 0.500 | 0.0566 | 0.634 | 0.186 | 0.140 | 0.112 | 0.867 | 0.003 | 0.008 | 0.129 | -0.202 | 0.199 | 0.004 | 0.900 | 0.949 | |
Properties are from the Falcon Metals & Supply Company structural framing catalog, which calculated them at a 33 KSI yield strength. Falcon now rolls 50 KSI or better steel. T is the design thickness. The data is provided as a guide; the party specifying the material is responsible for verifying it for their project.
Bridging, Carrying Channel & Bracing
Drywall contractors and framing crews use 1-1/2″ cold rolled channel as lateral bridging through the punch-outs of structural studs, and 3/4″ and 1-1/2″ channel as carrying channel under furring channel in suspended ceilings. For a deeper furring profile see our hat channel line.
Made and Shipped From Bessemer, Alabama
Everything is slit, roll formed and bent in-house at our plant at 1597 Hwy 150 in Bessemer, just outside Birmingham, with fast turnaround for builders, roofers, drywall contractors, and truss shops.
Related Categories
Cold rolled channel is part of our roll-formed profiles. More about our Bessemer plant.
Need Cold Rolled Channel?
Send your size, gauge, and quantity and we'll get back to you fast.
