Steel CoilMaster Coils and Slit Coilsin Birmingham, AL
Full mill prime steel coil, stocked and slit in-house at our Bessemer steel service center. Every product we make starts here.
Two Coil Products, One Source
All of our products are derived from the master coil. We stock master coils on the floor, slit them to width on our own slitting lines, and either ship the slit coil to you or run it through our roll formers. Slitting is where Falcon started more than 40 years ago.
Every master coil we stock is full mill prime steel, and everything slit from those coils is full mill prime steel too. That is central to our quality process, and it gives full traceability from the finished product back to the coil, and all the way back to the steel mill that produced it.
Master Coils

The Starting Point for Everything We Make
A master coil is the full-width coil as it arrives from the mill. Falcon Metals & Supply Company stocks full mill prime master coil, primarily in 50 KSI HSLA HD Galvanized with G60 and G90 coatings, from .033″ minimum up to .118″ thick.
Every coil on our floor is on hand and ready to slit, so builders, roll formers and metal stampers get quick turnaround without waiting on a mill run.
This is the same material that feeds every finished product we ship, from structural studs and purlins to hat channel and bent plate.
| Item | Spec | Notes |
|---|---|---|
| Quality | Full mill prime | No secondary, excess or off-spec coil |
| Steel grade | 50 KSI HSLA | Primary stock grade |
| Coating | HD Galvanized G60 and G90 | Hot-dip galvanized |
| Thickness | .033″ to .118″ | 20 gauge through 10 gauge |
| Certifications | Chemical and mechanical | Mill certifications supplied with the material |
| Availability | Stocked in Bessemer, AL | On the floor and ready to slit |
Slit Coils

Slit In-House, Stocked for Speed
Slit coil is produced on our coil slitting lines. Each master coil is slit to a specific width, depending on what the coil will be used for.
We maintain several different slit widths on the floor for specific machines and for different customer programs. That lets us expedite material very quickly, for our own roll forming lines and for our customers.
If it is slit and on the floor, it can usually be shipped in two days or less.
Every coil we slit is full mill prime, with certifications for chemical composition and mechanical properties, so roll formers, metal stampers and manufacturers get consistent, traceable material.
| Item | Spec | Notes |
|---|---|---|
| Source | Full mill prime master coil | Slit from our own stock in Bessemer |
| Steel grade | 50 KSI HSLA | Primary stock grade |
| Coating | HD Galvanized G60 and G90 | Hot-dip galvanized |
| Thickness | .033″ to .118″ | 20 gauge through 10 gauge |
| Width | Slit to your width | Several widths kept in stock for specific machines and customer programs |
| Lead time | Usually two days or less | For widths already slit and on the floor |
| Certifications | Chemical and mechanical | Supplied with the material |
Running your own stud and track roll formers? See structural stud and track coil, slit and bundled for that work.
Coil, Bundles & the Slitting Floor
Common Coil Questions
What is the difference between a master coil and a slit coil?
A master coil is the full-width coil as it arrives from the mill. A slit coil is a master coil that has been cut lengthwise on a slitting line into narrower coils of a specific width, ready to feed a roll former or stamping line.
What grades and coatings do you stock?
Primarily 50 KSI HSLA HD Galvanized in G60 and G90 coatings. We also run galvanized and red oxide material through our roll forming lines.
What thickness range can Falcon slit?
We slit from .033 inch minimum up to .118 inch thick, drawn from master coil stocked on our floor in Bessemer, Alabama.
What slit widths do you keep in stock?
We maintain several slit widths on the floor for specific machines and customer programs, and we slit to other widths to order. Send us the width your line needs and we will tell you what is on the floor.
How fast can a slit coil order ship?
If the width you need is already slit and on the floor, it can usually ship in two days or less. For other widths, master coil is on hand and ready to slit, so orders do not wait on a mill run.
Do you provide material certifications?
Yes. All coil is full mill prime metal with certifications for chemical composition and mechanical properties. We do not sell secondary or off-spec material.
What does full mill prime mean?
Full mill prime is first-quality material direct from the mill, certified to spec, as opposed to secondary, excess or off-spec coil. Every coil we stock and slit is full mill prime.
Who buys coil from Falcon?
Roll formers, metal stampers and manufacturers across the Southeast, along with our own roll forming lines.
Made and Shipped From Bessemer, Alabama
Everything is slit, roll formed and bent in-house at our plant at 1597 Hwy 150 in Bessemer, just outside Birmingham, with fast turnaround for builders, roofers, drywall contractors, and truss shops.
Related Categories
Coil is the starting point for everything we make. See what we roll form from it, or read how we've run coil out of Bessemer for 40+ years.
Need Master Coil or Slit Coil?
Send your gauge, coating, width and quantity and we'll get back to you fast.
Michael Siebesma · Call or text 615-649-2966 · msiebesma@falconms.com
Plant: (205) 424-4913




